There was a problem loading the comments.

Resolving the "Unable to Communicate with SmarterMail Service" Error

Support Portal  »  Knowledgebase  »  Viewing Article

  Print

Resolving the "Unable to Communicate with SmarterMail Service" Error


The SmarterMail Web interface communicates with the SmarterMail service over port 17001 or IPC. There are times, however, when communications problems between the web interface and the SmarterMail Service result in an error showing up in the Web interface that says "Unable to Communicate with SmarterMail Service.

Applies to All Versions of SmarterMail

To resolve this problem, perform the following steps:

  1. Open a Windows command prompt
  2. Run the following command: netstat –abnp tcp
  3. You should see a line similar to the following:
    TCP 0.0.0.0:17001 0.0.0.0:0 LISTENING 1720 [MailService.exe]
If you see that line, SmarterMail is correctly listening on the port, and the problem is most likely something else. If you do not see that line, the SmarterMail service needs to be restarted.

If mailservice.exe is running in task manager but is not listening on port 17001, contact SmarterTools support.



Share via

Related Articles

Copyright © 2023 TheGigabit. All right reserved. Reg.No: 200701034297 (792326-P)